Measured Building Survey | Geo-Coordinated/Revit

Project Scope

Our team carried out a Stage 4 Measured Building Survey, producing accurate 2D drawings and a detailed 3D Revit model. The survey captured architectural, structural, and key MEP elements, with a primary focus on piping systems.

Equipment Used

Laser Scanner RTC360
Leica GNSS Receiver GS14
Leica Total Station TS16

Duration

Site time: 3 days
Modelling time: 45 days

1. Measured Building Survey

The survey was delivered in two phases. Phase 1 covered 2D floor plans and walkthrough outputs. Phase 2 involved a comprehensive 3D Revit model.

Internal elements captured include radiators, suspended ceiling voids, boiler systems, and loft spaces. Detailed roof scanning was carried out, with 360 photogrammetry used where access was restricted.

2. Modelling Requirements

The model was geo-coordinated using an OS map with standard modelling tolerances applied. The scope covered architectural layouts, bathroom fixtures, structural elements (beams, joists, bracing, trusses), and internal features. MEP modelling focused primarily on piping systems.

Equipment Used

Laser Scanner RTC360
Leica GNSS Receiver GS14
Leica Total Station TS16

Duration

Site time: 3 days
Modelling time: 45 days

Deliverables

Deliverables were issued in two phases:

Phase 1: 2D floor plans (PDFs and DWGs)

Phase 2: 3D Revit model with coordinated floor plans

Measured Building Survey | Geo-Coordinated/Revit | Boston, UK

Project Scope

Equipment Used

Duration

1. Measured Building Survey

2. Modelling Requirements

Equipment Used

Duration

Deliverables

Related Blogs

Reduce Rework and Clash Errors with Accurate BIM Models

Why Point Cloud Data Is the Backbone of Accurate Revit Modelling

Advantages of LiDAR in Cultural Heritage Preservation Over Traditional Methods